Article provided by wikihow the wikihow manual. Please
On four strokes engines motocross bike, the engine is designed for sports use, so it’s necessary to regularly check valves adjustment. This is a manipulation which is not so difficult but requires attention and patience.
Steps
- 1Dismount the saddle and the plastic. Remove fuel tank and each aesthetic part which could interfere with manipulation around breech.
- 2Remove the cylinder head cover. You can see both camshafts with distribution chain.
- 3Remove ignition cover. This will be useful later to rotate the camshafts and thus find the quick link in the distribution chain.
- 4Check the valve adjustment. For this, place the piston at TDC. Take the workshop manual and look for the adjustment. Then take shim and compare with the data constructor. You can then deduct the value of blocks up.
- 5Make a mark on each sprocket and chain. Attach the chain by string or wire, then remove the chain link and shift the chain to have free access to camshafts. (You can also just relax the chain on some models.)
- 6Unscrew the screws holding the camshafts and remove them quietly.
- 7Take a magnet that's rather thin, and remove the pads with it.
- 8Change the pads with other ones which have the correct thickness.
- 9In the same manner that you removed the pellets, use the magnet to put them back into place.
- 10Put back the camshaft. After, it returns the chain in place, making sure that the brand is facing. Stretch the chain.
- 11Check if the valve clearance is good. If not, check the valve adjustment again.
- 12Put back each peripheral, ignition cover and head cylinder cover. After, get back fuel tank and plastics.
Video
Article provided by wikihow the wikihow manual. Please edit this article and find author credits at the original wikiHow article on How to Adjust Valves on a Motocross Bike. All content on wikiHow can be shared under a Creative Commons license.