Steps
- Listen for squealing sounds from the engine when you drive. These sounds likely mean one or more belts are worn, loose or damaged.
- Check belts for signs of wear. You need to do more than just visually inspect the belts. Pinch, squeeze and twist them, looking for cracks, fraying, splits or brittle places.
- Check your belts for places where the rubber is slick or glazed in appearance. Slick spots can cause a belt to slip and may be precursors to overheating and cracking.
- Inspect the pulleys. Look for a buildup of rubber deposits, as well as worn spots that could catch the belt and cause it to break.
- Check the belt tension. Check the tension on the longest length of the belt; there should be no more than one-half to one inch (1.25 centimeters to 2.5 centimeters) of give.
Tips
- According to the Car Care Council, V-belts should be replaced every four years or 36,000 miles, while serpentine belts are designed to last for up to 50,000 miles. However, it's a good idea to check your belts on a regular basis; ideally, once a month.
- Be sure that any replacement belts are the same length and width as the belt they replace.
Warnings
- If the V-belt for your water pump breaks, your engine temperature will rise rapidly. If the V-belt for your alternator breaks, your alternator no longer will supply power to your battery to keep it charged, and the compressor for your air conditioner will also quit. If your car has a serpentine belt and it breaks, all these things will happen. If your car starts to overheat, pull over immediately.
- Many of the new composite belts will not show signs of wear until they break.